Description
Micro-pipe and micro-connector
The PE (hard) microduct with an internal diameter of 4 mm and the corresponding connectors are the ideal conduit to individual irrigation points in your micro-irrigation system. They work according to a simple "plug & play" concept, the microduct and connectors are made of UV-resistant, impact-resistant plastic and are suitable for safe and easy installation without glue or clips.
The microduct and connectors are also ideal for use as an aeration hose on a koi or garden pond.
- safe and easy installation without glue or clamps
- 3/16" (4.5mm) ideal for hose/soft tube with inner diameter 4.0mm
- large inner diameter for maximum flow
- sharp tip and barbs for excellent adhesion
- max. 45 psi (3 bar) - PVC hose (soft) max. 1.5 bar
Microline PVC hose (soft) vsPE (hard)
PVC conduit (soft) is ideal if you want to lay your pipe above ground or with a low mulch application. Due to its tight bending radius, it is also ideal for curved installations.
PE hose (hard) can also be deformed under pressure with two fingers, but is considered a hard hose. As a result, this hard PE hose can be buried underground in the sand bed in an area of up to approx. 20 cm, so that the hose is only visible at the exit to the dripper or bubbler.
However, both hoses can also be combined within a system if you are planning an above-ground and underground route.
Media
There are currently no media files available.