All measurements in millimetres, weights in grams. For the photographic representation, we use an item size both studio light. The illustrations, technical data, dimensions and designs are non-binding. We reserve the right to make changes at any time without notice. The useful dimensions are defined or shown reinforced or result from the article designation. Other dimensions are for illustrative purposes only. Please note this in case of misuse.
Description
Float ball | Float set complete for floating removal
Float ball PP Ø approx. 120mm
The float ball, Ø approx. 120mm made of black PP polypropylene with retaining eyelet is ideal for IBC containers with a lid opening of DN150.
Float ball HDPE Ø approx. 150mm
The float ball, Ø approx. 150mm made of black HDPE with two yellow retaining eyelets is suitable for floating removal in water tanks and cisterns as well as any container where floating removal is desired or necessary.
Float set for floating extraction
The complete set for floating extraction
- 1 float ball HDPE Ø approx. 150mm
- 1 brass non-return valve with stainless steel suction strainer
- 1 snap hook for connecting the non-return valve to the float ball
- 1 Brass hose nozzle for suction hose 1" (25mm)
- 1 stainless steel hose clamp W4 20-32mm, 12mm bandwidth for hose fixation
Float ball | float set floating extraction
With floating extraction in water tanks or cisterns, the non-return valve is attached to a float ball and extraction does not take place from the bottom. This has the advantage that settled sludge or similar is not sucked in from the bottom. The floating ball ensures that the brass non-return valve floats below the surface. Floating dirt such as leaf debris is held back by the stainless steel sieve
The float set can be connected directly to a suction hose with an inner diameter of 25 mm (1" hose).
Not to be used with liquids that react with brass, e.g. chlorinated water.
Media
There are currently no media files available.
