All measurements in millimetres, weights in grams. For the photographic representation, we use an item size both studio light. The illustrations, technical data, dimensions and designs are non-binding. We reserve the right to make changes at any time without notice. The useful dimensions are defined or shown reinforced or result from the article designation. Other dimensions are for illustrative purposes only. Please note this in case of misuse.
Description
GARANTIA Speedy rainwater collector
Low-maintenance downpipe filter from GRAF for connection to the rain barrel, IBC container or above-ground rainwater tank
SPEEDY for 70 - 100mm (DN 70 - 100) up to 80m² roof area
- with filter insertEasy
- installation: no need to remove the downpipe for installationSimply
- drill - insert - done. Installed in 5min.
- no matter how far the downpipe is from the wall
- Suitable for downpipe sizes 70 - 100mm (DN70 - 100
- )Easy changeover from summer to winter operationComplete set
- with high-quality crown drill (suitable for all downpipe types), tank connection seal and flexible hose 40cm
- Grommet 32mm (1 1/4" hose
- )Recommended for roof areas up to max. 80m²Color
- black
The downpipe does not need to be disconnected for installation in order to place the rainwater collector in the correct position. If you use the rainwater collector with a rain barrel with lid, the inlet must not be higher than the top edge of the rain barrel. When using with an IBC container, the inlet must be higher than the IBC container so that it can be completely filled. The IBC container with inlet is vented via the inlet.
DOWNLOAD IB0290.503.040 SPEEDY dimensional sketch
DOWNLOAD IB0290.503.040 SPEEDY installation instructions
DOWNLOAD IB0290.503.040 SPEEDY installation instructions Pictures
Connection set for Garantia rainwater collector Speedy (80m²)
The set consists of:
- IBC cover in DN 150 or DN 225 (depending on selection)
- Feed-through on the lid including 32mm angled hose nozzle
- 1m spiral hose 1 1/4" (32mm)
- Hose clamps in W4 (stainless steel V2A)
The angled hose nozzle with free-turning union nut enables quick and easy alignment with the automatic filler after tightening the lid.
The IBC lid has a 1 1/4" external thread (41.91 mm) on the underside, to which an additional filter basket (not included) can be attached, for example.
READ MORE Detailed information: IBC container screw cap
Media
There are currently no media files available.
