All measurements in millimetres, weights in grams. For the photographic representation, we use an item size both studio light. The illustrations, technical data, dimensions and designs are non-binding. We reserve the right to make changes at any time without notice. The useful dimensions are defined or shown reinforced or result from the article designation. Other dimensions are for illustrative purposes only. Please note this in case of misuse.
Description
Hinge Bolt Clamp Tank Clamp W4, V2A Stainless Steel
The ultimate clamp in quality W4, V2A stainless steel for the highest demands in the food industry, mechanical engineering, agriculture, drainage, sludge suction, as well as for the ambitious DIY enthusiast!
Hinge bolt clamp GBS according to DIN 3017 Part 3 Form C1, ideal for smooth-walled suction and pressure air hoses with high hardness grades, plastic or steel reinforcements, or mounting on pipes or less pronounced socket forms.
The hinge bolt clamp is versatile in mechanical engineering, vehicle construction, agriculture, automotive, sanitation, and horticulture.
Ensuring Functionality
The tensile forces on the counter-nut when tightening are enormous. To prevent "cold welding" of the screw with the counter-nut due to frictional energy, always lubricate the threads with a drop of oil, rust remover, etc., during tightening.
Overview
- Band width 18 - 26mm (depending on size)
- W4 - Tension band, housing, and screw made of V2A stainless steel AISI 304
- Tightening torque: 20 Nm
- Breaking torque (minimum): 30 Nm
- Robust industrial quality
- Often overlooked ... for the correct selection of the hose clamp, the outside diameter of the hose is decisive!
Media
There are currently no media files available.
