All measurements in millimetres, weights in grams. For the photographic representation, we use an item size both studio light. The illustrations, technical data, dimensions and designs are non-binding. We reserve the right to make changes at any time without notice. The useful dimensions are defined or shown reinforced or result from the article designation. Other dimensions are for illustrative purposes only. Please note this in case of misuse.
Description
Hunter geared sprinkler I-20 series
the top model among Hunter's geared sprinklers - the stainless steel version is a visual highlight in your garden!
The I-20 PGP® version is the powerful geared sprinkler with the versatility and efficiency for every location.
- Throw range: 4.9 to 14.0m
- Flow rate: 0.07 - 3.23m³/hour
- Flow rate: 1.2 - 53.8l/min.
- Sprinkler connection 3/4" female thread
- Automatic return to the correct angle setting
- Partial and full circle in one model
- anti-vandalism mechanism
- direct adjustment of the irrigation sector (50° - 360°) on the sprinkler head
- incl. non-return valve up to 3m height difference (prevents puddles forming within a sector at the lowest point with different terrain levels)
- Nozzle set with 8 standard nozzles and 4 flat spray angle nozzles
- FlowStop® system enables a sprinkler to be switched off without interrupting the entire system
Automatic sector return
This function causes a return to the originally set sector, even if the head has been turned manually. This ensures protection against vandalism in any environment.
Vandalism-protected decoupling mechanism
Drive mechanism protected according to the slip clutch principle, which enables manual rotation of the head without damage.
Partial and full circle in one model
Patented continuous 360° mechanism for partial and full circle in one model from 50° to 360°.
Head and slotted locking screw
Use a slotted screwdriver or the Hunter adjustment wrench to easily and conveniently make adjustments as required.
FloStop control
FloStop blocks the water flow to individual sprinkler heads while the system is running. This function is particularly suitable for replacing nozzles or switching off certain heads during maintenance and installation.
Includes 12 nozzles
Eight standard nozzles between 1.5 and 8.0 . and four "low angle" nozzles between 2.0 LA and 4.5 LA cover the entire performance range of the Hunter I-20. No nozzle is pre-installed.
Stainless steel riser
Stainless steel is the ideal choice for difficult ground conditions, unpredictable climatic conditions or when used - or to put it simply: it just looks great!
Outlet stop valve (4.56 M)
As air in the system can cause long-term damage to the gear sprinklers and pipes, the drain stop valve prevents the pipes from draining when the system is switched off. This saves water, prevents damage and ensures a longer service life for the system.
© Photo credits Hunter Industries
Media
There are currently no media files available.
