All measurements in millimetres, weights in grams. For the photographic representation, we use an item size both studio light. The illustrations, technical data, dimensions and designs are non-binding. We reserve the right to make changes at any time without notice. The useful dimensions are defined or shown reinforced or result from the article designation. Other dimensions are for illustrative purposes only. Please note this in case of misuse.
Description
KFE ball valve for filling and draining
KFE ball valve 1/2" male thread made of pressed brass, nickel-plated with full bore for filling and draining.
Ball seal and stuffing box made of PTFE (Teflon), red, one-sided wing handle with unscrewable hose nozzle and sealing cap
Can be used for water, fuels, heating oil, etc.
Connection:
External thread, self-sealing
Material:
Brass CW617N nickel-plated (can be used for drinking water pipes)
Thread:
BSP pipe thread ISO 228-1, not self-sealing, sealing with Teflon tape or similar.
Handle:
Painted metal, red
Temperature:
-20°C to 150°C
Working pressure (PN):
max. 16 bar at 20°C medium water
Note: No additional sealing material (hemp, Teflon tape) may be used with self-sealing fittings!
Not to be used with plastic threads - not even with reinforcement ring - as the hard seal can/will burst the plastic internal thread.
DOWNLOADRoHS confirmation HTC
DOWNLOADREACH addition brass HTC
DOWNLOAD the thread identification - or why 1" is not 25.4mm
Media
There are currently no media files available.
