All measurements in millimetres, weights in grams. For the photographic representation, we use an item size both studio light. The illustrations, technical data, dimensions and designs are non-binding. We reserve the right to make changes at any time without notice. The useful dimensions are defined or shown reinforced or result from the article designation. Other dimensions are for illustrative purposes only. Please note this in case of misuse.
Description
Suction/Pressure Hose, Black
Highly flexible, dimensionally stable suction/pressure hose, cold-flexible down to -10°C. Ozone, chlorine, and UV resistant, excellently suitable as a suction and pressure hose in the pond and pool sector, as well as for slurry distribution, municipal vehicles, the printing industry, mechanical engineering, and generally in irrigation technology. Both above-ground and underground (recommended in protective pipes) installation is possible.
Max. Bar*: Spiral-reinforced hoses are not suitable for closed systems under continuous pressure or short-term high pressure – cross-linked hoses should be used in these cases.
Max. Bar refers to the maximum pump performance and not to the maximum pressure limit of the hose.
The hose can be used as a suction hose (suction side of the pump) or as a pressure hose (pressure side of the pump) within open systems or low-pressure systems (printing machines, municipal vehicles, agricultural machines).
Max. Bar refers to the maximum pump performance and not to the maximum pressure limit of the hose.
The hose can be used as a suction hose (suction side of the pump) or as a pressure hose (pressure side of the pump) within open systems or low-pressure systems (printing machines, municipal vehicles, agricultural machines).
Tip: For the correct choice of hose clamp, the outside diameter of the hose is crucial. Hose diameters are specified in metric units, and the use of outdated inch measurements can cause confusion and should only be used for orientation.
If your hose has an I-Ø of 32mm, for example, you will need a hose fitting with 32mm but a hose clamp that spans at least 37.6mm.
If your hose has an I-Ø of 32mm, for example, you will need a hose fitting with 32mm but a hose clamp that spans at least 37.6mm.
Shipping Cost Notice Germany Hose Cutting and XXL Rolls 
:
25mm, 50m roll, per roll shipping cost 9.90 EUR gross
32mm, per section 6 - 25m shipping cost 7.90 EUR gross
32mm, 25m roll, per roll shipping cost 7.90 EUR gross
32mm, 50m roll, per roll shipping cost 9.90 EUR gross
38mm, per section 1 - 5m shipping cost 7.90 EUR gross
38mm, per section 6 - 25m shipping cost 9.90 EUR gross
38mm, 25m roll, per roll shipping cost 9.90 EUR gross
38mm, 50m roll, per roll shipping cost 12.90 EUR gross
40mm, per section 1 - 5m shipping cost 7.90 EUR gross
40mm, per section 6 - 25m shipping cost 9.90 EUR gross
40mm, 25m roll, per roll shipping cost 9.90 EUR gross
40mm, 50m roll, per roll shipping cost 12.90 EUR gross
50mm, per section 1 - 5m shipping cost 7.90 EUR gross
50mm, per section 6 - 20m shipping cost 9.90 EUR gross
50mm, 25m roll, per roll shipping cost 12.90 EUR gross
60/63mm per section 1 - 5m shipping cost 9.90 EUR gross
60/63mm per section 6 - 15m shipping cost 12.90 EUR gross
75mm per section 1m shipping cost 9.90 EUR gross
75mm per section 2 - 10m shipping cost 12.90 EUR gross
90mm per section 1m shipping cost 9.90 EUR gross
90mm per section 2 - 7m shipping cost 12.90 EUR gross
102mm per section 1m shipping cost 9.90 EUR gross
102mm per section 2 - 4m shipping cost 15.90 EUR gross
Section lengths under roll length will be delivered as one length.
Print:
YES
Resistance:
Soft PVC
Color:
Opaque Black
Food-safe:
NO
REACH:
1907/2006/EC
RoHS:
2015/863
Material:
Soft PVC
Spiral:
Hard PVC
Temperature:
-10°C to +60°C
Tolerance:
DIN 16940
Pressure:
Not suitable for closed systems or applications where continuous pressure is applied – cross-linked hoses should be used.
- Smooth inner layer with integrated plastic reinforcement spiral
- Low flow turbulence and internal particle adhesion
- Strong full mantle made of soft PVC
- Ozone, chlorine, and UV resistant
- Despite its strong construction, lightweight and flexible with high abrasion resistance
- No algae growth due to opacity
- Manufactured according to ISO 3994 standard
- Temperature range -10°C to +60°C
Bending Radius
The bending radius is a recommendation for how tightly you can lay the hose in a half-arc without causing the hose to kink or get damaged. This maximum guideline is significantly influenced by the temperature of the environment and the hose itself when being laid!
Suction and Pressure Hose Black
- Suction and delivery hose Black with plastic spiral
- Transparent, soft PVC inner layer
- Hard PVC spiral reinforcement
- Transparent, soft PVC outer wall
Media
There are currently no media files available.
