Description
Flexible PVC Hose – Adhesive Hose Poolflex Spaflex
The flexible adhesive hose, also known as a flexible pipe, is ideal for quickly bridging longer distances in your pool installation with bends and curves in a single piece. However, it should be noted that it does not have the same performance characteristics as a rigid PVC pipe.
Important: Unlike most hoses, the outer diameter is decisive for the Flex Hose, as it can only be glued using PVC-U adhesive fittings or connected with PP compression fittings! A connection using hose nozzles is NOT possible!
Shipping cost information Germany – hose cut lengths and XXL rolls
:
Flex hose 25mm, 50m roll – per roll shipping costs 9.90 EUR gross
Flex hose 32mm, 25m roll – per roll shipping costs 9.90 EUR gross
Flex hose 32mm, 50m roll – per roll shipping costs 12.90 EUR gross
Flex hose 40mm, 25m roll – per roll shipping costs 9.90 EUR gross
Flex hose 40mm, 50m roll – per roll shipping costs 15.90 EUR gross
Flex hose 50mm, per section 1–5m shipping costs 7.90 EUR gross
Flex hose 50mm, per section 6–25m shipping costs 12.90 EUR gross
Flex hose 50mm, 25m roll – per roll shipping costs 12.90 EUR gross
Flex hose 63mm, per section 1–5m shipping costs 9.90 EUR gross
Flex hose 63mm, per section 6–20m shipping costs 12.90 EUR gross
Flex hose 63mm, 25m roll – per roll shipping costs 15.90 EUR gross
Flex hose 75mm, per section 1–13m shipping costs 9.90 EUR gross
Flex hose 90mm, per section 1–9m shipping costs 12.90 EUR gross
Sections shorter than the full roll length are delivered as one continuous piece.
When bonded with PVC-U fittings or clamped with PP compression fittings, operation above +40°C is not recommended.
When using BD Fast couplings, temporarily higher operating temperatures are possible, as the internal sleeve supports the hose.

PVC Flexible Adhesive Hose
The integrated plastic spiral allows the hose to be used as both a suction and a pressure hose. For underground installation, we recommend laying the hose inside a protective conduit. It is not suitable for permanent pressure applications, such as domestic water supply, since the hose structure lacks the necessary cross-linking for long-term dimensional stability.
The embedded rigid PVC spiral cannot be clamped with hose clips.
- Inner and outer surface smooth
- Suitable for temperatures from -10°C to max. +45°C with flowing media
- 3–8 bar maximum pump pressure – *not suitable for closed systems under continuous pressure; cross-linked hoses must be used in such cases
- Bondable with standard, high-quality PVC-U adhesives – Tangit PLUS is not suitable!
- Ideal for flexible underground installation (in a sand bed)
- Resistant to ozone, UV, and chlorine; suitable for saltwater pools
- Connection: can be bonded with PVC-U fittings or clamped with PP compression couplings for flexible hose
The Bending Radius
The bending radius is a recommendation indicating how tightly the hose can be laid in a half-circle without kinking or being damaged. This maximum guideline is significantly influenced by the ambient temperature and the hose’s own temperature during installation.
PVC Adhesive Hose – Cross Section
- Ideal for water supply and recirculation in swimming pools
- Solid grey, soft PVC outer wall
- Rigid PVC spiral reinforcement
- Fully grey, soft PVC inner wall
Media
There are currently no media files available.
