Description
Water socket
Irritec water socket with green lid lock
The water socket - e.g. integrated in a valve box - enables water to be drawn for additional manual irrigation, pool and pond filling etc. at any location in the garden. The matching key is simply inserted into the connection without pressure and snaps into place, providing you with a tapping point with a 3/4" (26.44 mm) external thread connection.
- External thread water socket 3/4" or 1" as required
- Height approx. 15cm
- Ø approx. 6.5cm
- max. working pressure 8 bar
Water socket from IRRITEC with 3/4 inch or 1 inch connection
With the water socket from IRRITEC, water can be drawn from the ground like electricity from a socket. The practical 3/4 inch external threaded connection of the insertable key means that any connection with a 3/4 inch internal thread can be connected.
The water socket is connected to the underground water supply network made of PE pipe and PE pipe compression fittings at the desired location and you have a tapping point that can be used at any time for manual irrigation, pool and pond filling or agricultural tapping. Inside the valve there is a spring-loaded ball that opens the closure by means of the snap-in process of the socket wrench.

Installation of the water socket
A water socket is completely buried in the ground, only the green end cap is visible. If you are installing several water sockets and want to use them at the same time, make sure there is sufficient water pressure. The cover must be closed when mowing the lawn.
Media
There are currently no media files available.